|
An
audio monitor provides a signal with variable pitch and amplitude,
allowing you to hear changes in blood pressure. Digital LCD display
provides average or peak signal values from 0 to 1999 mV. With an optional
pressure gauge (not provided — see PM015D/R), the user may calibrate the
display to read mm Hg. Recorder output connector allows direct connection
to a pen recorder, oscilloscope or computer via a data acquisition system.
BP1 accepts WPI’s BLPR blood pressure transducer as well as other blood
pressure transducers.
Specifications
| Amplification | x1, x10, x100, variable (x5-x1000) |
| Bandwidth, small signal (-3dB) | 300kHz
(x1) 30kHz (x10) 3kHz (x100) 0.3kHz (x1000) |
| Output voltage swing | ±5V |
| Maximum output current | 2mA |
| Input impedance, each input | 100kΩ || 0.01μF |
| Transducer applied volts | 10V nominal, varies with load; 25mA, maximum |
| Digital
panel meter |
0-1999mV (calibrated in mmHg pressure when supplied with pressure guage) Meter reads average value or ± peak (1-20Hz) |
| Power | 95-135V or 220-240V, 50/60Hz |
| Dimensions | 8.5x5.12x10" (21.6x13x25.44cm) |
| Shipping weight | 11 lb. (5kg) |
