■ SP260p Four-Syringe Push-Pull Pump
四針筒推-拉式幫浦
•Accepts syringe sizes: 10uL - 60mL
•Minimum Flow Rate: 0.001 uL/hr
•Maximum Flow Rate: 86 mL/hr (60 mL syringe)
•95-135 V, 50 Hz
Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through setup: First, select syringe from table stored in the pump\'s memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press \"start.\" It\'s fast and simple. Your settings are permanently stored in memory - there\'s no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.
FeaturesThe
SP260p can hold up to four syringes. As two syringes are infusing, two
other syringes are withdrawing at the same rate. The SP260p is used for
single-cycle applications only. Features include: knob locks/unlocks drive
block for effortless, drag-free adjustment, simple menu-driven setup:
Syringe diameter (selected from displayed table), dispense volume,
dispense flow rate, continuous dispense volume display, preset volume
control and automatic shutoff, settings can be reviewed or changed during
operation, optical encoder stall detection, choice of unit selection, last
settings stored in permanent memory, built-in RS-232C interface for
computer linking or \"daisy chaining\" up to 100 pumps, and TTL
interface for foot switch, timer, relay control; outputs for run
indicator, valve control.
| Mode | Push-Pull (single cycle) |
| Syringe Size | 10 µL-60 mL (four) |
| Maximum Flow Rate | 86 mL/min (60 mL syringe) |
| Minimum Flow Rate | 0.001µL/hr |
| Linear Force | 40 Ib (18 kg) |
| Advance Per Microstep | 0.165 micron |
| Maximum Step Rate | 1600 steps/sec |
| Minimum Step Rate | 1 step/100 sec |
| Accuracy | < 1% error |
| Reproducibility | ± 0.1% |
| Dimensions | 11 x 9 x 5.5 in., 28 x 23 x 14 cm |
| Shipping Weight | 12 Ib (5.4 kg) |
| Notes: | Available 95-135 V or 220-240 V, 50/60 Hz |
