■ SP210c Continuous Cycle Syringe pump 連續循環式針筒幫浦
•Accepts syringe sizes: 10uL - 60mL •Minimum Flow Rate: 0.001 uL/hr •Maximum Flow Rate: 86 mL/hr (60 mL syringe) •95-135 V, 50 Hz
|
|||||||||||||||||||||||||||
Sturdy,
reliable, and easy to use
Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through setup: First, select syringe from table stored in the pump\'s memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press \"start.\" It\'s fast and simple. Your settings are permanently stored in memory - there\'s no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions. FeaturesThe SP210c can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two other syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 2-way valves, the pump can empty and refill syringes for a continuous dispense. Holds four syringes, 10 mL to 60 mL each. With larger syringes the full volume may not be usable. [With a 60 mL syring, 40 mL is usable; with a 30 mL syringe, the full volume is usable. |
|||||||||||||||||||||||||||
|
WPI 台灣總代理 台灣節能企業股份有限公司 TEL:02-2715-1616;02-2716-0905 FAX:02-2715-5268 內容及版權屬節能企業及其所屬關係企業所有 All Rights Reserved By Zelon Enterprise & Associates |