■ SP101i Two-Syringe Microdialysis Pump
雙針筒微透析式幫浦
•Accepts syringe sizes: 10uL - 10mL (two)
•Minimum Flow Rate: 0.001 uL/min (10 uL syringe)
•Maximum Flow Rate: 0.351 mL/min (10 mL syringe)
•95-135 V, 50 Hz
.jpg)
Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through setup: First, select syringe from table stored in the pump's memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press "start." It's fast and simple. Your settings are permanently stored in memory - there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings.
Features
Developed especially for use in microdialysis experiments, these pumps produce very fine syringe movement. The modified SP100i gearing features a sixfold gear reduction compared to standard models, allowing pumping at much smaller flow rates. (See sensors such as ISO-NO and Micro-C for detection of dialysates.) The SP101i is a dual barrel infusion only pump.
Specifications
| Mode (Microdialysis) | Infusion |
| Syringe Size | 10 µL to 10 mL (two) |
| Maximum Flow Rate (10 mL Syringe) | 0.351 mL/min. |
| Minimum Flow Rate (10 µL Syringe) | 0.001µL/min |
| Linear Force | 40 Ib (18 kg) |
| Advance Per Microstep (1/2-step) | 0.088 micron |
| Maximum Step Rate (1/2-step) | 400 steps/sec |
| Minimum Step Rate | 1 step/30 sec |
| Accuracy | < 1% error |
| Reproducibility | ± 0.1% |
| Dimensions | 9 x 6 x 5.5 in. , 23 x 15 x 14 cm |
| Shipping Weight | 7.5 Ib (3.4 kg) |
| Notes: | Available 95-135 V or 220-240 V, 50/60 Hz |
