|
Bridge8
is a modular, rack-mountable amplifier system based on a similar
architecture to the popular ISO-DAM8A amplifier system. Bridge8 is
specifically designed to be used as a signal conditioning amplifier with
strain gauges and other powered transducers. Bridge8 includes differential
amplifiers featuring high input impedance, high common mode rejection and
low current leakage input terminals for low noise operation. The Bridge8
also features a half bridge switch and channel offset A wide variety of
WPI transducers are available for force, temperature, pressure and light
measurements. The Bridge8 amplifier is a clear choice where convenience
and quality are required. Any combination of ISO-DAM8 or Bridge8 modules
may be combined in the same enclosure. The ISO-DAM8A module is also
available in this rack configuration.
Specifications
| Input impedance | > 1012 Ω |
| Amplification | 1, 10, 50, 100, 500, 1000 & Adjustable |
| Input leakage current | 0.1 pA at 25°C |
| Voltage ofset adjustment | ±50mV (low); ±100mV (high) |
| Amplifier output voltage | ±4.4V (10mA, max.) |
| Excitation Voltage | 10V (±5.0V) 100mA, max. |
| Equivalent noise signal input | 10 10 |
| Low pass filter band (KHz) | 0.03, 0.1, 0.3, 1, 5, 10, Wide Band R-C Butterworth 6 dB /octave |
| System enclosure dimensions . | 7 x 17 x 9.2 in |
| Shipping weight | 10 to 21 lb. ( 4.5 to 9.5kg ) |
WPI 台灣總代理
台灣節能企業股份有限公司
TEL：02-2715-1616；02-2716-0905 FAX：02-2715-5268
內容及版權屬節能企業及其所屬關係企業所有
All Rights Reserved By Zelon Enterprise & Associates