BetterSkin Electrodes BetterSkin 電極 •
WPI’s
unique Ag/AgCl pellet manufacturing process gives increased mechanical
strength for extra durability •
Highly
porous surface for low impendence, high current passing capability and
stable, low noise measurements •
High flex
cable comes in shielded and unshielded form (Carbon fiber cable for NMR
environment is available upon request) •
Strong epoxy
house increases durability and makes cleaning easy • Ultra-high purity material for low offset and drift |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
WPI’s new BetterSkin™
electrodes are high quality Ag/AgCl reusable surface-mounted electrodes
designed to be used for the acquisition of all biopotentials. Each
electrode is fabricated using an optimum quality sintered Ag/AgCl pellet
encased within a strong epoxy housing designed to have an extended
lifetime. The result is a superior electrode that provides accurate and
clear transmission of even the smallest surface biopotentials. In
comparison to standard "stamped" metal electrodes and Ag/AgCl
disposable electrodes, WPI’s BetterSkin electrodes provide increased
stability, lower noise and lower offset voltage during surface
biopotential recording. These features are
particularly important during measurement of very small potential signals,
such as EMG or EEG recording.
Four BetterSkin electrode sizes are currently offered: 7-mm, 13-mm,
16-mm
Three different connector and cable combinations are offered: a
2-mm pin with 1 meter unshielded cable; a 2-mm pin with 1 meter shielded
cable (shielding is connected to an additional 2 mm grounding pin); and
1.5mm DIN safety socket with 1 meter unshielded cable. All electrodes
require adhesive disks (e.g., WPI's ADD200 series) and recording
gel(GEL100). Bulk discount orders are possible and trade-inquiries are also welcome.
|
WPI 台灣總代理 台灣節能企業股份有限公司 TEL:02-2715-1616;02-2716-0905 FAX:02-2715-5268 內容及版權屬節能企業及其所屬關係企業所有 All Rights Reserved By Zelon Enterprise & Associates |